Get To Know AF
Search Catalog
      GO   
 All Categories    Push-On Hose
All Categories > Hose and Fittings > Hoses > Push-On Hose > View Items  

Push-On Hose

Check up to five results to perform an action.

Designed for low pressure automotive and industrial applications. (Hose clamps are not required.)

Uses: For assembly of low pressure fuel and oil lines, vacuum gauge lines, air lines and other uses where application will not exceed working pressures over 250 psi. Specifications

Inner Tube: Synthetic rubber compounded to resist the deteriorating effects of gasoline, oil, diesel fuel, air water, grease, kerosene, and common hydraulic fluids.

Reinforcement: One ply of braided fiber reinforcing material.

Outer Cover: 340-4, 450-6, 340-8, tough cotton jacket treated with graphite making it resistant to oil, gasoline, vibration, heat or cold. 430-4, 430- 6, and 430-8: a rubber cover provides additional resistance to abrasion.

Temperature: Hose remains flexible and operative at temperatures ranging from -40° F to +250° F except air with a 160° F maximum.

Assembly Instructions: Cut hose to correct length. For determining correct length, subtract cut-off factor for each end from overall length. Lubricate hose and end for easy assembly. Push hose on fitting until seated under protective cap.

Disassembly Instructions: Slit hose from protective cap to end of push-on insert. Bend hose and remove with quick jerk.






    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 3 of 3 1 

Item #

Item Name

O.D. (inch)

I.D. (inch)

Min. Bend Radius (inch)

330-4 Push-On Hose 1/2 1/4 3
330-6 Push-On Hose 5/8 3/8 3
430-4 Push-On Hose 1/2 1/4 3
  Results 1 - 3 of 3 1 
 
   Home  |   About Us  |   Offers  |   Products  |   Applications & Vendors  |   Customized Solutions  |   Links  |   Employment  |   Contacts
© Copyright Automotive Fasteners, 2005
Designed by Software Bridge Inc., 2003